WEBVTT NOTE Paragraph 00:00:04.398 --> 00:00:07.648 The Lindgren funnel trap system consists of a series 00:00:07.668 --> 00:00:12.905 of four, eight, twelve or sixteen funnels arranged vertically. 00:00:13.055 --> 00:00:16.150 The twelve configuration is the best all-round 00:00:16.150 --> 00:00:18.845 for pest suppression and detection programs. 00:00:19.150 --> 00:00:22.636 However, use whatever number of funnels are recommended 00:00:22.636 --> 00:00:26.016 by the chosen methodology for your survey situation. 00:00:26.847 --> 00:00:30.175 First, there are two different types of tops 00:00:30.175 --> 00:00:33.472 and you will need to determine which kind you have. 00:00:33.472 --> 00:00:37.344 If you have a top where the first funnel is already attached with nuts and bolts, 00:00:37.344 --> 00:00:39.839 then you can skip on to the next step. 00:00:40.435 --> 00:00:44.081 Otherwise, you will need to attach the first funnel to the top piece. 00:00:44.451 --> 00:00:47.286 Snap the three, square tabs at the top 00:00:47.286 --> 00:00:50.479 of the funnel to the corresponding slots on the top. 00:00:50.879 --> 00:00:54.241 Now begin connecting the funnels together. 00:00:54.241 --> 00:00:58.159 Funnels are attached by inserting the three long attachment pegs on each funnel 00:00:58.159 --> 00:01:01.120 into the corresponding holes of the next funnel. 00:01:01.599 --> 00:01:04.959 The round tip goes through the large hole, 00:01:04.959 --> 00:01:08.783 and then locks by sliding the attachment peg in the smaller slot. 00:01:09.360 --> 00:01:11.745 You must lock the peg or the trap will 00:01:11.745 --> 00:01:14.528 not hang correctly and trap pests properly! 00:01:15.182 --> 00:01:16.671 Keep attaching funnels until 00:01:16.671 --> 00:01:20.111 you reach the second to last funnel for your chosen configuration. 00:01:20.545 --> 00:01:26.009 For example, if you are using a 12-funnel set up, stop at #11. 00:01:26.009 --> 00:01:28.959 This is because the bottom funnel is part of the final count. 00:01:29.519 --> 00:01:32.399 You need the bottom funnel specifically because 00:01:32.399 --> 00:01:36.239 it is threaded for securely attaching the specimen collection cup. 00:01:36.895 --> 00:01:40.815 Attach the bottom funnel the same way as the others. 00:01:41.455 --> 00:01:46.079 Last, secure the collection cup by snapping it on and screwing it tightly. 00:01:46.527 --> 00:01:50.703 Make sure it is tight so it doesn’t fall off once insects begin piling up. 00:01:51.839 --> 00:01:54.735 With your trap completed, it is time to place the lure. 00:01:55.551 --> 00:01:58.031 There are two potential lure types 00:01:58.031 --> 00:01:59.700 depending on the pest of interest. 00:02:00.575 --> 00:02:02.607 It could be either a rubber septum type, 00:02:02.607 --> 00:02:03.952 or a polysleeve. 00:02:05.281 --> 00:02:07.103 Be sure to wear disposable gloves 00:02:07.103 --> 00:02:10.671 so that your bare skin does not touch the lure. 00:02:10.671 --> 00:02:13.295 Chemicals from your skin will taint the pheromone lure. 00:02:13.295 --> 00:02:16.159 And more importantly, you risk cross contamination 00:02:16.159 --> 00:02:18.351 with other lures you may be working with. 00:02:19.377 --> 00:02:22.495 The lure can be placed anywhere along the side of the funnels. 00:02:22.495 --> 00:02:24.735 Higher placement tends to work better. 00:02:24.735 --> 00:02:27.569 Definitely attach higher than the bottom collection cup. 00:02:28.447 --> 00:02:32.447 For the rubber septum, the easiest way to attach is with a paper clip. 00:02:33.231 --> 00:02:35.855 Straighten out one end of the paper clip. 00:02:35.855 --> 00:02:39.168 Gently but firmly push the straightened end of the paper clip through 00:02:39.168 --> 00:02:41.952 the lip edge of the larger opening on the septum. 00:02:43.249 --> 00:02:47.232 Bend up the straightened edge to secure the lure onto the paperclip. 00:02:47.775 --> 00:02:49.554 Thread a zip tie through the paperclip 00:02:49.554 --> 00:02:53.087 Then attach the lure to the trap by lopping the zip tie 00:02:53.087 --> 00:02:54.767 around a peg on the trap. 00:02:55.793 --> 00:02:58.687 If using a polysleeve, run a long zip tie through 00:02:58.687 --> 00:03:00.799 the hole in the corner of the sleeve. 00:03:00.799 --> 00:03:04.639 Then attach that zip tie to a peg connecting the funnels. 00:03:05.727 --> 00:03:09.711 Once the trap is securely baited, it is ready for field work. 00:03:10.335 --> 00:03:13.519 Keep in mind the purpose of this trap is to mimic a tree. 00:03:13.519 --> 00:03:16.256 Therefore, it must be hung so that all the funnels are 00:03:16.256 --> 00:03:18.943 fully expanded and not touching the ground 00:03:18.943 --> 00:03:21.199 in a way to push any of the funnels together. 00:03:22.095 --> 00:03:27.071 Please see the video on Successful Field Placement for tips on hanging this trap in the field.